Transportní řetězec/en

In the transportation chain, the definition of the container pickup location, customs procedures, unloading location, and depot will take place.

Selecting, filtering individual containers and copying their data

The header of the transport chain contains an overview of all containers entered in the Header and containers section. The overview is used to select the container for which we want to fill in the transport data. The application allows data to be filled in only for one selected container at a time. If we want to enter the same data for other containers, it is necessary to use the button .

When copying data, the source container is already selected and marked in gray . The data from this container will be copied to the containers you have chosen. You can select the target containers by checking the designated boxes .

---

The filtering of containers is done via the drop-down menu located on the left side of the container panel. Filtering can be done according to recipients selected in the Header and Containers sections. Upon the initial page load, the value 'All' is always automatically selected, meaning that the application displays all recipients in the order, i.e., all containers, in the panel.

By selecting a specific recipient from the menu, only the containers associated with this recipient will be displayed in the panel.

Keep in mind that you are filling in the details for only one selected container. You can recognize the selected container by its light blue background.

If not all containers are visible in the panel, the gray icon is activated and you can scroll with .

Transport chain icons and functions

Throughout the section, actions for individual sections can be applied using action icons described below:

Left side:

- action icon for the function Drag and drop. Individual sections of the transport chain can be moved or reordered using this function.

- with the help of arrows, individual sections in the transport chain can be moved chronologically, or their order can be changed.

Right side:

- action icon for adding individual stops in the transport chain. The following types of stops can be added:

Unloading Location - see chapter Unloading Location. The place of unloading cannot be placed before the point 'Place of customs clearance'.

Customs Clearance Location - see Customs clearance place chapter.

Transit Terminal (Transit Terminal cannot be entered as the last point of transport)

Terminal - select a transit terminal. The field contains a function drop-down.

Note - you can enter additional information for METRANS customer service.

Trucking from this terminal – by selecting the transit terminal and checking this box, container delivery by truck will be carried out from this terminal (note: it may not be the cheapest option for the given transport).

Cleaning station

Cleaning station - it is necessary to select from the prepared list. The field contains a drop-down function.

Note - you can enter additional information for METRANS customer service.

Contacts - via the action icon you can add a contact person and their details. To send messages from the system, it is necessary to fill in the e-mail field. An existing contact can be selected using the action icon.

Stop at

Place type - select which stop it is - Weighing / Other stop.

Place name - fill in the name of the next stop.

'Street, Identification number, Street 2, City, ZIP code, State - filling in the address for the given stop.

Note - additional information for the stop location.

Contacts - via the action icon you can add a contact person and their details. To send messages from the system, it is necessary to fill in the e-mail field. An existing contact can be selected using the action icon.

You can vyplnit/přidat kontakty for individual sections.

Container takeover location

Terminal - select the container pickup terminal. The field contains a drop-down function.

Container will be taken over from - select with the toggle button the means by which the container will be delivered to the container takeover point. If none of the options are selected, after the SAVE action, an error message will appear in the pop-up notification with the text "No transport mode selected". Field is mandatory.

Ship - the container will be delivered to the pickup location by ship. It is also necessary to fill in the fields Ship Name and ETA.

Truck - the container will be delivered to the pick-up by truck. The Ship Name field becomes inactive and the ETA field becomes the Available From field.

Train - the container will be delivered to the pick-up location by train. The Ship Name field becomes inactive and the ETA field becomes the Available From field.

Ship Name - select the ship name. The field contains the drop-down function. If the ship is not in the menu, contact METRANS customer service.

ETA - Estimated time of arrival of the ship at the terminal (displayed if Pick up from ship is checked). The date must be earlier than the requested departure date.

Available from - select the date from which it is possible to pick up the container/s at the selected terminal. (Shown if Take from Ship is unchecked). The date must be earlier than the requested departure date.

Shipper - select the shipper/operator who delivered the container(s) to the selected terminal.

Requested departure date - Select the date you want to send the container(s) by train from the selected terminal. Our customer service will try to adhere to your chosen departure date; however, we reserve the right to change the date according to the current situation. The requested date must not be earlier than or the same day as ETA / Available From

T1 from port provided by ordering party – If the container is to be transported by train from the port under customs supervision and the checkbox is not selected, METRANS will issue the T1 transit document. If the checkbox is filled in, the consignee will provide the T1 transit document. By checking this box, the offer of customs procedures for transport under customs supervision is limited.

Temperature – Desired temperature of the product at the port. Currently used for the ports of Koper and Trieste. It is necessary to fill in the plus (+) or minus (-) sign. The field is active only if it concerns RF-type containers.

Unloading place directory

To create a new entry, proceed through the action icon and sections Customs clearance place and Unloading place must be filled in manually.

In the field, you can also select a previously created record, and the "Customs Clearance Place" and "Unloading Place" fields will be automatically filled in. The field contains adrop-down function.

If a "new record" is selected and filled in, by saving the page using the Save & Next button, the filled record will be saved to the directory at the same time. Only the sections "Unloading Place" and "Customs Clearance Place " will be saved to the directory. A record that contains multiple Customs Clearance Places / Unloading Places will not be saved to the directory.

If an existing record is selected from the directory and subsequently edited, by saving the page using the Save & Next button, the record in the directory will be updated simultaneously.

Records in the dropdown menu are related to the selected recipient. This means that containers with different recipients will have different options for the "Place of Unloading". Therefore, if you use the function for orders with different recipients, the record of the Customs Clearance Place and Unloading place from the source recipient (container) will be applied to the other recipients (containers) as well.

Use External Truck

This option is subject to the configuration of the transportation chain and is therefore not available for all types of orders.

By checking this box, you inform us that the trucking part of the transportation is not organized by METRANS a.s. and the selection from the directory of unloading places is inactive.

If checked, you will be prompted to select the terminal from which the external truck will pick up the loaded container, and the "Unloading Place" section will be inactive with the selected terminal.

In the section for Container Handover, an option for Repositioning by Metrans will be added.

"Repositioning by Metrans" - for orders involving the use of a external truck, it is possible to simultaneously request the repositioning of an empty container. After selecting the checkbox, it is necessary to specify the delivery terminal for the empty container, the turn-in reference, and the carrier.

Customs Clearance Place

In the customs clearance field, select one of the offered options, and only then will the subsequent form be displayed. Deleting or changing the value in the customs clearance field will hide or redraw the form. It is not possible to select more than one method of customs clearance for one container.

To Customs Office

The container(s) will travel from the takeover terminal under customs supervision. To create a transit document T1, it is necessary to know the destination customs office where the driver will physically go before unloading.

Customs Office – select one of the options. The field contains a drop-down function.

Broker Name - the contact person/name of the declaration for the driver at the customs office.

Customs Note - you can fill in additional information for clearance at the customs office, the record will be printed on the CMR consignment note.

Contacts - using the action icon , you can add a contact person and their details. To send messages from the system, it is necessary to fill in the email field. Using the action icon , you can select an existing contact.

To Customs Agency

The container(s) will travel from the takeover terminal under customs supervision. To create a transit document T1, it is necessary to know the destination customs office where the container will be customs cleared.

Customs Office – select the destination customs office from the list. The field contains a drop-down function.

Customs Agency Name – Fill in the full name of the customs agency.

"Street, House Number, Street 2, City, ZIP Code, Country" - filling in the address of the customs agency.

Customs Note - you can fill in additional information for clearance at the customs office; the record will be printed on the CMR consignment note.

Contacts - Using the action icon , you can add a contact person and their details. To send messages from the system, it is necessary to fill in the email field. Using the action icon , you can select an existing contact.

At Unloading Place

The container(s) will travel from the takeover terminal under customs supervision. To create a transit document T1, it is necessary to know the destination customs office with which the unloading location collaborates and from which it has received the status of an approved recipient. The driver will go directly to the unloading location without detouring to customs office/customs agency.

Customs Office - select the destination customs office from the list. The field contains a drop-downn function.

Customs Procedure at Terminal

The container/s will be transported from the takeover terminal under customs supervision. The customs clearance of the container will take place at the METRANS terminal.

Terminal - select the terminal where the customs clearance will take place (usually the first terminal in the METRANS network - HUB terminal).

Customs Clearance Through - select who will handle the customs clearance:

• METRANS Customs Agency

• Other Customs Agency - the customs clearance will be handled by a third party at the selected terminal.

• Other Customs Agency issues subsequent T1 - a third party will arrange the issuance of the subsequent transit document.

• Other Customs Agency - Original T1 not to be closed - the T1 document for the journey to the METRANS terminal is not completed by METRANS but by a third party (which subsequently arranges customs clearance/issuance of another T1 document).

Broker name - this field can be filled in if the customs clearance is not handled by METRANS declaration. Please fill in the name of the customs agency/agent who will handle the customs clearance.

Customs Note - you can fill in additional information for customs clearance, the record will be printed on the CMR consignment note.

Contacts - through the action icon you can add a contact person and their details. To send messages from the system, it is necessary to fill in the email field. Using the action icon you can select an existing contact.

Clearance in port

The container/s have already been cleared at the takeover terminal, and METRANS takes over the container/s for rail transport already released.

EU goods

Containers in free circulation, no customs duties are paid. It is necessary to specify and select using the switch which of the following options applies:

• EU product without T2L - if the container is not accompanied by a T2L document. This concerns goods from the EU without crossing international waters. When selecting the customs procedure for EU goods, this option is automatically chosen (modifiable).

• T2L presented in the port - for transporting a container between two locations within the customs territory of the EU via the territory of a third country (international waters), without changing the customs status of the goods, the T2L document applies - select if the document will be completed by the customs office at the port.

• T2L presented outside the port - for transporting a container between two locations within the customs territory of the EU via the territory of a third country (international waters), without changing the customs status of the goods, the T2L document applies - select if the document will be completed outside the port.

  When selecting, it is then necessary to define where the customs document will be completed.

• ATA-CARNET presented in the port - ATA Carnet is an international customs document that allows for the temporary export of goods exempt from customs duties and taxes. Select if the document will be completed by the customs office at the port.

• ATA-CARNET presented outside the port - ATA Carnet is an international customs document that allows for the temporary export of goods exempt from customs duties and taxes. Select if the document will be completed outside the port.

  When selecting, it is then necessary to define where the customs document will be completed.

Unloading Place

Transport Mode - select the method of delivery of the container/s to the unloading location, only then will the subsequent form be drawn. By deleting or changing the value in the transport mode field, the form will be hidden or redrawn.

If the unloading location is the same as the address already created and filled in "Consignee" field in the section Header and containers, there is no need to rewrite the address. Instead, you can use the action button "Copy Consignee Address" to transfer the values into the form.

Pressing the copy button immediately performs the copying and pasting action, and the target data in the form will be overwritten without warning.

If the unloading location is the same as the address already created and filled in under the "T1 Consignee" field, there is no need to rewrite the address. Instead, you can use the action button "Copy T1 Consignee Address" to transfer the values into the form.

Pressing the copy button immediately performs the copying and pasting action, and the target data in the form will be overwritten without warning.

METRANS truck

Delivery to the unloading place by a truck provided by METRANS.

Unloading Place Name - fill in the name of the unloading location according to the commercial register.

Unloading reference - fill in the reference for unloading the container at the unloading place.

Street, House number, Street 2, City, Postal code, Country - filling in the address of the unloading place.

Unloading Note - you can fill in additional information for delivering the containers to the unloading place. The record will be printed on the CMR consignment note.

Contacts - You can add a contact person and their details through the action icon . To send messages from the system, it is necessary to fill in the email field. You can select an existing contact using the action icon .

Stacker/Multitrailer

Delivery to the unloading place using a Stacker/Multitrailer.

Name of unloading place - fill in the name of the unloading place.

Unloading code- the reference for unloading the container at the unloading place.

Street, House number, Street 2, City, Postal code, Country - filling in the address of the unloading place.

Unloading Note - you can fill in additional information for delivering the containers to the unloading place.

Contacts - via the action icon you can add a contact person and their details. To send messages from the system, it is necessary to fill in the e-mail field. An existing contact can be selected using the action icon.

Stop at

Wagon Singleload

Delivery to the unloading place using a wagon (delivery by rail).

Unloading Place Name - fill in the name of the unloading place.

Unloading reference - the reference for unloading the container at the unloading place.

Station number - fill in the railway station number. Based on the station number, the fields City, Postal code, and Country will be filled in. Caution: To correctly load railway sidings, it is necessary to select the main station (e.g., Bohumín, not Bohumín-Vrbice). The field includes a drop-down function.

Železniční vlečka – číslo železniční vlečky v dané stanici. Vyžadováno pouze pro ČR. Pole obsahuje funkci drop-down. Pole je neaktivní, dokud není vyplněno číslo stanice (v ČR).

Poznámka místa vykládky – můžete vyplnit doplňující informace pro doručení kontejnerů na místo vykládky.

Kontakty – přes akční ikonu lze přidat kontaktní osobu a její údaje. Pro odesílání zpráv ze systému je nutné vyplnit pole e-mail. Pomocí akční ikony lze vybrat již existující kontakt.

Předání prázdného kontejneru

Definujte terminál/místo pro odevzdání kontejneru po vykládce:

Kontejner se nevrací na žádný terminál – zaškrtnutím sdělíte, že kontejner zůstane po vykládce na místě vykládky či jiném místě. Pokud je pole zaškrtnuto, pole Terminál, Turn-in reference a Rejdař jsou vypnuty. V poli terminál se pro přehlednost doplní text "Kontejner se nevrací na žádný terminál".

Terminál – vyberte terminál, na kterém má být kontejner po vykládce odevzdán. Pole obsahuje funkci drop-down.

Turn-in reference – reference pro odevzdání kontejneru na daném terminálu.

Rejdař – vyberte rejdaře, pro kterého bude kontejner odevzdán. Pole obsahuje funkci drop-down.

Kontejner bude předán na – vyberte přepínacím tlačítkem pomocí jakého prostředku bude kontejner z místa převzetí kontejneru doručen nebo zda bude doručen na depo. Pokud není vybrána žádná z možností, po akci ULOŽIT se zobrazí chybová zpráva ve vyskakovacím oznámení s textem "Nebyl zvolen režim dopravy". Pole je povinné.

Depo – kontejner bude na zvoleném terminálu umístěn do stocku vybraného rejdaře. Pro přijetí kontejneru, musí být kontejner předhlášen od rejdaře.

Loď – kontejner bude z místa předání odplouvat lodí. Je nutné také vyplnit pole Název lodi, closing a ETS, překládkový a cílový přístav.

• Název lodi – zvolte loď. Pokud loď není v nabídce, kontaktujte ZS METRANS. Pole obsahuje funkci drop-down.
• ETS – předpokládané datum odplutí lodi z přístavu. Datum musí být starší nebo rovno closingu.
• Closing datum – datum pro nejpozdější dodání kontejneru do přístavu k dané lodi. Datum musí být mladší nebo rovno ETS.
• Closing čas – upřesňující čas pro closing lodi.
• Nejdřívější příjezd – definujte, kdy nejdříve může být kontejner doručen na terminál. Jedná se o nezávazný a nepovinný údaj. Datum musí být dříve než ETS a closing.
• Překládkový přístav – uveďte překládkový přístav lodi na cestě do cílového přístavu. Vyžadováno pro přístav Bremerhaven/Koper, pokud je zaškrtnuto pole Žádost o TCC číslo.
• Cílový přístav – definujte cílový přístav lodi. Vyžadováno při zapnuté volbě Žádost o TCC číslo.

Tahač – kontejner bude z místa předání vyzvednut tahačem. Pole Název lodi, closing a ETS, překládkový a cílový přístav se stávají neaktivními.

Vlak – kontejner bude z místa předání vyzvednut tahačem. Pole Název lodi, closing a ETS, překládkový a cílový přístav se stávají neaktivními.

Žádost o číslo TCC – pouze pro odevzdání kontejneru v přístavu Koper. Jedná se o předhlášení do přístavního systému.

Port Forwarder - Napište název agenta pro odbavení kontejneru v přístavu. Pouze pro přístav Koper, Rijeka a Terst.

---

Vrácení TANK/BULK do depa METRANS

Pokud je přepravován tank nebo bulk kontejner, nesmí být vrácen do deponie na terminále METRANS s nevyčerpaným zbytkem nebezpečného zboží. Aplikace na takový stav uživatele upozorní chybovou notifikací a zároveň bude pole deponie zobrazovat ikonu chyby.

Uživatel může zmíněnou chybu odstranit třemi způsoby:

1. Přidání dalšího místa zastávky s typem vymývání v transportním řetězci
2. Změna deponie na jiný než METRANS terminál
3. Odebrání UN čísla v kroku Zboží (pouze za předpokladu, že se skutečně přepravuje BEZPEČNÉ zboží)